| |
 |
 |
Vol
1 # 06 |
|
Wednesday
19 May 2010 |
|
|
 |
 |
In
this edition of e-noise
we give a lowdown on
one of the most versatile
and popular products
in Anutone’s Noizkon
...KIP.
In KIP, the annealed
glassfibre of the isolation
media is produced by
a multiple flame attenuation
process which generates
fibres that have a modulus
of elasticity of 10.5
million PSI (738,223
kgs/cm2) and nominal
fibre diameters of less
than .00027 inch (6.8
microns).
Model KIP glassfibre
isolators uniquely allow
a wide range of loading
on a given isolator
while maintaining a
constant natural frequency.
Natural frequency of
Model KIP glassfibre
media is controlled
by isolator thickness
rather than static deflection
as with linear steel
springs. To determine
the natural frequency
for other than 1"
(25 mm) isolator thickness,
the 1" (25 mm)
thick isolator natural
frequency is divided
by the square root of
the actual thickness
to be used, i.e. the
natural frequency of
a 4" (102 mm) thick
isolator is half the
natural frequency of
a 1" (25 mm) isolator
at the same load for
the same density material.
Model KIP glassfibre
is unique as a structural
support in that applied
loads are substantially
below pre-compression
loads |
|
|
| |
thus
providing 300% or more
overload safety factor.
The result is permanent
resiliency with constant
natural frequency.
Model KIP glassfibre
is non-corrosive, non-combustible,
nonabsorbent, and resists
rust, ozone, mildew
and fungus. It is vermin
proof, will not shrink,
swell, or decompose.
Isolation characteristics
of the media are constant
over a temperature range
of -40°F to 250°F
(40°C to 121°C).
KIP Isolator Pads are
your best friends for
all seasons. Whatever
your vibration issues,
solutions with Model
KIP are almost always
there. |
|
|
 |
| Anutone’s
Noizkon now loops e-noise every
Wednesday (earlier fortnightly).
If you have missed previous
issues please visit www.anutone.com/infobin/enoise.html |
|
|
|
|
|
|
|
|
 |
Let
me know what you feel about our latest initiative,
‘enoise’, now weekly every Wednesday.
We welcome your views and suggestions to enable
us to provide you with news about industrial &
community noise that you need the most.
Siddharthan, Manager - Noizkon |
|
|
|
|
| |
|
All logos and names are the copyrights of the respective owners.
To ensure delivery to your inbox, please add info@anutone.com
to your address book.
If you wish to stop receiving our emails, reply with Unsubscribe
in the subject line to info@anutone.com
Anutone Acoustics Limited – 231, 7th Cross, Indiranagar
1st Stage, Bengaluru 560 038, India Phone +9180 2520 3114, Fax
+9180 2520 3115, info@anutone.com
|
|
